Servicing – Pricing
LoginServicing and Maintenance Packages
Safety Check (Every 6 months/500 miles), £50 includes:
- Bike is assessed for wear and damage.
- Gears adjusted to improve alignment.
- Chain oiled.
- Brakes adjusted to improve.
- Wheels trued to within 2mm.
- Tyres inflated to recommended pressure.
Excludes parts and additional labour
Standard Service (Every 12 months/1-2000 miles) – £80
Includes Safety Check plus:
- Full gear adjustments inc: indexing and performance oil applied.
- Full brake adjustments inc: check and alignment of pads (reset for optimum performance).
- Full check of all bolts inc: torque set to axles, cranks and handlebar/stem, all to manufacturer specification.
- Bottom bracket adjusted to reduce/remove play.
- Headset adjusted to reduce/remove play.
- Wheels trued and tensioned in the bike to within 1mm.
Excludes parts and additional labour
Intermediate Service (Every 1-2 years/2-4000 miles) – £110
Includes Standard Service plus:
- Hub bearings cleaned and rebuilt with new grease.
- Full wheel truing and tension service in a professional truing jig to within 0.5mm.
Excludes parts and additional labour
Complete Service (Every 2-4 years/4000-6000 miles) – £140/£200
Includes Intermediate Service plus:
- Bottom bracket removed, cleaned and serviced.
- Headset bearings removed, cleaned and serviced.
- Torque check/tighten of all major bolts to manufacturer specification.
- All frame pivot bearings inspected and re-greased (full suspension models).
- Hardtail / Road bikes from £140 and full Suspension/TT/E Bikes from £200.
Excludes parts and additional labour
Race Prep (Every 5 years/6000 miles+) – £240/£300
Includes Complete Service Plus:
- Full strip down to a frame only .
- All bolts removed, cleaned and refitted with fresh grease.
- Full detailed clean down of the bike and polished to showroom standard.
- Hardtail / Road bikes £240 and full suspension/TT/E Bikes £300.
Excludes parts and additional labour
Full Strip down and re build for Paint – £120/£200/£300
- Full strip down to a frame only
- All openings prepped and readied for re fit after new paint
- Fully Re built with a finishing service, ready to ride out of the door
- Hardtail / Road bikes from £120 and full suspension/TT bikes from £200, E Bikes from £300
Excludes parts and additional labour
Bike Fitting
Bike Fitting service (Basic adjustment) – £40
The Bike fitting service is spent with the initial stages inside our workshop on our turbo trainer setting the saddle, handlebar and cleat position. The fit concludes with a short ride our on the local road. This is highly recommended as a first bike fit and most benefit for new road cyclists.
Individual Services
Suspension
Fork basic service- £30
Full strip down of a basic unit, clean of internals and rebuild with fresh grease/oil
Fork advance service- £120+
Full strip down of high end suspension units, clean of internals and rebuild with fresh grease/oil. Please contact us for specific pricing
Shock basic service – £30
Full strip down of a basic unit, clean of internals and rebuild with fresh grease/oil
Shock advanced service – £110+
Full strip down of high end suspension units, clean of internals and rebuild with fresh grease/oil. Please contact us for specific pricing
New fork fit – £30+
Removal of old fork, clean down of headset and fitting of new unit to desired height. Set up included with our mechanic
New shock fit – £20+
Removal of old unit and installation of new unit. Set up included with our mechanic
Dropper seatpost fit – £20+
Fitting of new dropper seatpost including routing of cable/hose
Dropper seatpost bleed – £20+
Seatpost bled through with new oil (included) and air pressure set
Dropper seatpost service – £40+
Seatpost stripped down and internals cleaned, rebuilt with new grease/oils/seals as needed
Brakes
Brake service – £30
Full brake service to both brakes including check and re-alignment of pads, clean of braking surface and adjustment to reach optimal performance
Brake fitment – £30+
Removal of old brakes (inc hydraulic) from bike, fitment of new units. Brake bleed service available for £10 per brake caliper if required
Brake bleed inc service (per brake) – £20
Wheels and pads removed, brake pistons oiled, full bleed including fresh oil and pressure test. Brake re-setup with full clean down. Oil is included in the price
Drivetrain
Bottom bracket service – £25
Cranks and bottom bracket removed and full clean of frame and BB housing. Re-grease and install followed by a check of the gears
Bottom bracket removal (stuck fast in frame) – £20+
Removal of Stuck fast bottom bracket. Where possible, the old unit will be saved but cannot be guaranteed.
Gear service – £30
Full gear service including indexing, stop screw adjustment and re-oil using performance oil.
Drivetrain installation and set up (MTB/Flat bar models) – £60+
Fitment of the drivetrain groupset including bottom bracket, chainset, cassette, chain, shifters and derailleurs (front/rear)
Drivetrain installation and setup (Road models) – £80+
Fitment of the drivetrain groupset including bottom bracket, chainset, cassette, chain, shifters , bartape and derailleurs (front/rear)
Chain fit BMX / singlespeed- £10
New chain fitted to a BMX / single speed including tension and adjustment to brake
Shimano Di2 firmware update – £30
Update your Di2 including switching the Di2 gear levers, multi shift through the gears, change the speed at which Di2 can shift gear and troubleshooting
Pedal re-tapping – £5
Re-cut of the pedal thread to clear out small damage/dirt build up
Pedal helicoil service – £30
Ream out and installation of new pedal threads. Price per thread (9/16 only)
Power meter fitting – £30+
Installation and setup of power meter pedals or cranks.
Includes handover and tuition of operation (device not included)
E Bike System Update (Bosch, Shimano, Sportdrive) – £30+
Update of the latest software to the E Bike system.
Wheels
Axle service – £20/30+
Wheel axle removed, all parts cleaned down and assessed for wear. Rebuilt with performance grease and tension adjusted in bearings (per wheel)
Front wheel is £20+, Rear wheel is £30+
Inner tube fit (single wheel) – £10
Old inner tube removed, tyre/wheel inspected for damage and penetrating items, new tube installed and inflated to recommended pressure (per wheel)
Inner tube fit (wheel in bike) – £15+
Wheel removed from bike, old inner tube removed, tyre/wheel inspected for damage and penetrating items, new tube installed and inflated to recommended pressure. Wheel reinstalled in bike, brake/gears checked for alignment (per wheel)
Tubular tyre fit (inc glue) – £50
Rim surface cleaned and degreased. New tyre seated on rim with new glue (per wheel)
Tubeless Tyre/Kit Fit – £30
Full fitting of tubeless kit including preparation, installation and pressure tuning (per wheel)
Wheel truing (Small) – £10
Wheel trued to within 1mm, loose spokes tightened
Wheel truing (Large) – £15
Wheel trued to within 0.5mm, full wheel re-tension performed
Wheel Build – £40+
New wheel built including full lacing, truing and tensioning to a complete, strong wheel
Chris King hub service – £30+
Full strip down of Chris King hub, clean, re-grease and rebuild
Steering
Handlebar fit (MTB/Flatbar models) – £20
All components removed from old handlebar, new bar fitted and all items re-fitted and set to customer’s chosen position
Handlebar fit (Drop bar models) – £30+
All components removed from old handlebar, new bar fitted and all items re-fitted and set to customer’s chosen position (new tape not included)
Handlebar tape Fit (Drop bar models) – £10
New handlebar tape fitted including removal of old tape (cost of new tape not included)
Headset fit – £20+
Fork and old headset removed, frame and fork cleaned and bearings cleaned/re-greased. Bearing tension set. New fork can be cut down and a star nut fitted for an additional £10 when booked as part of service
Headset service – £20
Fork and bearings removed from bike. Cups and bearings cleaned and re-greased before installing. Bearing tension set.
Accessories
Cycle computer fit and setup – £10+
Installation and set up of a cycle computer. Includes handover and tuition of operation (computer not included)
Electronic Device fit and setup – £20+
Installation and setup of electronic device such as Garmins, Wahoo’s ect. Includes handover and tuition of operation (device not included)
Pannier frame fit (inc bag) – £20+
Installation of a pannier frame to a cycle. Includes fitting of pannier bag if required
Mudguard set fit (full) – £40
Installation of fixed mudguard set with stays to bicycle
Mudguard fit (single) – £20
Installation of fixed mudguard (single) with stays to bicycle
Stabiliser set fit – £5
Installation and set up of a stabiliser set. Includes test ride and adjustment if required (price does not include stabilisers)
Frame Preparation
Bottom bracket re-tap service – £20
Frame bottom bracket threads cleaned out using our professional tapping set. Not designed for a first cut. Removal of bottom bracket service also available
Bottom bracket facing – £20
Frame bottom bracket faced using our professional facing set. Removal of bottom bracket service also available
Headtube ream service- £20
Frame headtube reamed using our professional reaming tool. 1-1/8 frames only. Removal of headset service also available
Headtube facing – £20
Frame headtube faced using our professional facing tool. 1-1/8 frames only. Removal of headset service also available
Brake mount facing – £20
Frame or fork brake mount faced using our professional facing tool. Removal of brakes service also available
Bolt/thread re-tap – £5
Re-cut of the thread to clear out small damage/dirt build up
Bolt/thread helicoiling – £20
Ream out and installation of new threads.
Various sizes including M5, M6 and M8
Bottle cage nut insert – £30
Removal and re-installation of bottle cage threads (frame space may limit work to be carried out)
Assembly and setup
Boxed bike build and safety check – £60+
Full assembly of a bike from box to complete cycle. Included is a safety check and bike fitting with the client to gain a optimum position.
Frame/bike building – £100+
This service is designed to build a bike from its raw components. Included is the assembly and set up of your chosen components. Please contact us for specific pricing
Cleaning
Paraffin/PTFE Wax of a Chain – £30
Removal of chain from the bike, full ultrasonic clean of the chain followed by a Paraffin/PTFE hot bath to impregnate the chain with this long lasting compound (cleaning of other components also available)
Ultrasonic cleaning (Road caliper brakes) – £30
Removal of brakes from bike, full clean with our own in-house ultrasonic cleaning bath, re-oil and fitting.
Ultrasonic cleaning (Drivetrain) – £30
Removal of chain, cassette and derailleurs from the bike, full clean with our own in-house ultrasonic cleaning bath, re-oil and fitting. A split link may be needed after work completed to re-fit chain (supplied at £5). Wipe down of bike included
Invalid Displayed Gallery
Basic wash – £20
A light clean to keep the dirt at bay. Included is a de-grease to the chain and drivetrain components, soap wash the bike and rinse down. Stubborn dirt will require our more in-depth showroom clean.
Invalid Displayed Gallery
Showroom clean – £50
Our most involved clean. We aim to take any bike and fully clean to showroom standard removing any evidence of dirt from the bike. Included is a manual hand polish to the frame/fork.
Invalid Displayed Gallery
All fitment services do not include the cost of parts unless stated. Full quotations for all work are available upon request.
We reserve the right to charge a storage charge of £5 per week per bike for bikes which have been left with us.
This charge will come into effect 7 days after the agreed date of collection/completion.
All prices are correct as of Jan 2024 E&OE and are a guide prior to a full assessment from our trained mechanics – prices may vary depending on the specific bike